Power Conditioners

ONEAC Condition One Series -75 to 1000VA

The ONEAC® ConditionOne® range provides a high performance solution without battery backup. It has a built-in isolation transformer to eliminate electrical noise, ensuring attached equipment is unaffected by the electrical environment and does not degrade over time. ONEAC ConditionOne® are available in 120/230 V, 50/60 Hz, 75 - 1000 VA (single-phase) units. Optional ONEGROUND technology is available to correct ground skew problems.

ONEAC PCm Medical Grade 120 - 3000 VA

The ONEAC PCM range provides a high performance solution without battery backup for the medical environment. It has a built-in isolation transformer to eliminate electrical noise and limit earth leakage current, ensuring patient safety and attached equipment is unaffected by the electrical environment and does not degrade over time. Medical grade ONEAC PCm power conditioners (/UL60601-1/ IEC60601-1) are available in 120/230 V, 50/60 Hz from 120 to 3000 VA (single-phase). The PCM Series features an isolation transformer for premium power conditioning and limits earth leakage current, ensuring patient safety and global compliance to IEC60601-1. NOTE: These units are NOT TO BE USED WITH DIRECT PATIENT LIFE SUPPORT EQUIPMENT.

ONEAC CB/CC Series 1.44 - 5.76 KVA

The CB Series is rated at 1.44 and 1.92kva with input voltages of 120 or 240v and output voltages of 120v or 240/120v split phase.

The CC Series is rated at 3.33 -5.76kva with input voltages of 208 or 240v and output of 204/120 split phase.

Tight surge let-through: highest possible assurance that conducted transient voltages won’t damage or degrade hardware components. Virtual Kelvin Ground: maximizes system reliability by preventing “soft errors” and other symptoms of logic disruption caused by high frequency noise. Low impedance technology: handles high crest factors and inrush currents without oversizing. High efficiency transformer: generates less heat and reduces operating cost. Maintenance-free: no parts that wear out so total lifetime cost is limited to the original purchase price. Small footprint, quiet operation: unobtrusively fits into any environment. Plug and play: plugs and receptacles meet NEMA standards. Designed & manufactured under ISO 9001: assures consistent quality and performance. 5 year warranty: the best assurance of product quality and performance in the industry.

ONEAC CBS/CCS Series 1.92 - 4.8 KVA

The CBS is Rated at 1.92kva with input options of 100-240v and output options of 114-240v.

The CCS is Rated at 2.88 and 4.8kva with input options of 120-240v and output options of 114-240v

Tight surge let-through: highest possible assurance that conducted transient voltages won’t damage or degrade hardware components. Virtual Kelvin Ground: maximizes system reliability by preventing “soft errors” and other symptoms of logic disruption caused by high frequency noise. Low impedance technology: handles high crest factors and inrush currents without oversizing. High efficiency transformer: generates less heat and reduces operating cost. Maintenance-free: no parts that wear out so total lifetime cost is limited to the original purchase price. Small footprint, quiet operation: unobtrusively fits into any environment. Plug and play: plugs and receptacles meet NEMA standards. Designed & manufactured under ISO 9001: assures consistent quality and performance. 5 year warranty: the best assurance of product quality and performance in the industry.

ONEAC CX Series 140 - 1000 VA

CX Power conditoners are optimized for high plused current-on-demand required by switch mode power supplies. They come in an Enclosed version or in a Plate Mounted version designed to fit within your own equipment chasis.

Tight surge let-through assures that conducted transient voltages won’t damage equipment or compromise accuracy. Low impedance technology provides optimal interface with switching power supplies—handling high crest factors and inrush currents without oversizing. Voltage conversion accepts input voltages of 120V, 240V or 480V and providing either 120V, 240V or 240/120V split phase output. Bi-directional filtering of high frequency conducted noise assures reliable operation and prevents “noisy” loads from affecting sensitive electronics in the distribution system. 5-year warranty: assurance of product quality and performance.

ONEAC CSR Series 9.6 KVA - Single Phase

CSR Series is a 9.6KVA, Single Phase, High Perfromance Power Conditioner

• Frequency: 50/60 Hz


• Load Regulation: +/- 2%


• Load Regulation Response time: < 2 ms for a 50% change in load


• Surge Voltage Withstand Capability: ANSI/IEEE C62.41 Category A&B 6kV/200 & 500 Amp, 100kHz ringwave, 6kV/3000A impulse waveform


• Surge and Noise Rejection-Isolation: With unit under power, and ANSI/IEEE C62.41 Category A pulse applied, either normal mode (L-N) or common mode (N-G) at the input, the noise output voltave will be less than 10v normal mode and less than 0.5v common mode in all four quadrants.


• Overload Capability: All units typically tolerate 10 times rated output for 0.5 cycle, 5.5 times rated output for 1 second and 3.5 times rated output for 5 seconds without degradation.

ONEAC CD Series 3 Phase Power Conditioners 22-100 KVA

ONEAC CDR Series 3 Phase Power Conditioners 7.2 - 45 KVA

Staco AVR

The Staco Energy Products Company Automatic Voltage Regulator is based on a series regulation transformer controlled by variable transformers (VTs). It off ers tight output regulation, robust design and easy customization. In today’s world, the cost of electrical power and its quality have become major operating concerns. The ncontinuing increase in the cost of electrical power has heightened interest in energy savings, and poor power quality has been identifi ed as a cause of expensive malfunctions and shutdowns in new high

technology equipment. Voltage regulation problems account for more than 90% of the power problems seen at most sites. The Staco Energy’s base Automatic Voltage Regulator (AVR) provides protection against all but the most extreme voltage swings. When additional non-voltage issues occur, Staco Energy off ers a series of options that address such issues as high voltage transients, high harmonic content and site load balance. This

integrated and targeted approach provides sitespecific power correction in a one-box solution.

Eaton Power-Sure 800 Power Conditioner

Eaton® Power-Sure 800 power conditioners provide high quality power with inherent surge protection, noise and bi-directional harmonic filtering, as well as superior isolation. These units range from office models to floor or wall/panel mounted industrial models and provide an excellent solution for any application with noisy or poor power quality.

MaxPower F7 Series 120 VA to 15 kVA, 60 Hz Ferroresonant Power Conditioner

Providing superior voltage regulation, surge suppression and noise filtering with its exceptional ferroresonant technology, MaxPower’s F7 Series of line conditioners protect connected equipment against damaging and costly power problems.

Ideal for a wide variety of industrial applications including automation and control equipment, PLCs, machine tools, and semiconductor fabrication equipment, the F7 Series acts as a step-up or stepdown transformer, as well as provides circuit protection with its galvanic isolation. Its unique design can increase the Mean Time Before Failure (MTBF) of connected equipment (25 years typical).

Available in models ranging from 120 VA to 15 kVA, MaxPower’s F7 Series safeguards equipment from seven of the nine common power problems defined by the IEEE: sags, surges, undervoltages, overvoltages, line noise, switching transients and harmonic distortion. The F7 Series offers a perfect solution to protect devices within environments that experience dirty power, which can lead to equipment damage or failure, resulting in costly downtime.